prev. -- follow up

Stage.3 ::

no differential test yet . . . // now is ↓

 

---

Update! : 2018.03.04 -- Stage.4 ::

. . . Some clean-up ↓↓

After frequency pass ↓↓

In the old soviet literature it is said to be a good Op Amp ???
. . . for audio frequency operation ... perhaps ???

TEST ↑↑ TEST ↑↑ TEST

---

[Eop]

Yet a next attempt to make sense of the LM301

tThe experiment . . . adapted from :: National Semiconductor Corporation , SGS-THOMSON Microelectronics , Linear Technology Corporation , . . .

Still performing some 10x 5x worse than the d/s suggests . . .
-- but there is improvement since the prev. TEST

---

Related parts ::

1. http://www.chipinfo.ru/dsheets/ic/153/ud2.html (LM101)
2. http://www.chipinfo.ru/dsheets/ic/153/ud6.html (LM301A)
3. http://www.chipinfo.ru/dsheets/ic/157/157ud2.html (dual LM301)
4. http://tec.org.ru/board/k553ud2/93-1-0-2179 (LM301)

---

"Stage 2" ::

(compare → https://ocw.mit.edu/resources/res-6-010-electronic-feedback-systems-spring-2013/textbook/MITRES_6-010S13_chap03.pdf ←) the offset and operation of amplifying cfg. is unreasonably critical to R26 value -- if this is to be "normal" then tuning the real Item to work does not pay off using it instead of LM358 etc. + it's gain seems to vanish fast at higher frequencies (at transient pass even when driven to 10k load ??????) . . . as already said this thing only reacts on control currents R29,-6,10,12,3 -- even if i succeed to match this to d/s ?? will the real thing ever perform that good (not mentioning the wrong/misleading/"of a zero help" schematic diagrams on d/s-s) ... it is better to make your own poor op amp that you know how to tune than keep guessing what this thing suppose to be , how it suppose to perform/work , did it work in a first place (as in a sense of today's op amps)

---

"Stage 2.a" ::

-- the prev. "Setup" even verifies for 25kHz 12 to 42 V tot supply ???

---

[Eop]