Verifying the MOSFETs´ RDS(ON)

. . . being used to BJT-s i always thought the R_DSON being some illustrative variable that has nothing to do with reality - amazingly enough the tests i performed verified it being NOT a theoretical figure !

used the MOSFETs (IRFZ44N and BUK455-60A) unmounted from cordless drills´ speed adjustment circuits

the IRFZ44N existed in Spice DB but for the BUK455-60A i used a model compilation method described in the [LT Spice Tutorial 6] website (which actually resulted in better match with reality this time ??)

 as for R_DS(ON)

as and for directly measured I_D, U_D, U_G

ah! - also modified in ↑that↑ spice tutorial the files RDSon test jig and Switching Time Test Jig coz they were totally impractical to use for given purpose (fine tuning your MOS-Fet models) respectively to Cust MosFETs - 01.asc and Cust MosFETs - 02.asc (note that you have partially pre-calculate and modify accordingly the component parameter values to get your response right)

---

Update!

PS! Since the power supply (Mod.: SMP-100KB, Rev.: A3, Date Code: 8945, +12Vdc/3.75A - output) was not very stable (or depended on it´s ~AC input ???) the source data can be trusted from 1 to 3 digits (depending on conduction state of the FET and stability of the PSU) and contains extra to that the unknown systematic +other errors of the multi-meters -- this was not intended to be a precision measurement anyway - but for setting the apx. (static) device margins (near +25°C).

also there were used voluntary statistical alterations to guess better the values required to form a "believable" (?accepatable) output for R_DS .


[Eop]

rev. +1.2V Linear Voltage Regulator with Current Limit

not built in real yet /!\ e.g. possibly no reverse pol. prot. + unknown amount of spec. not handled states ...

---

[Eof]

CD4043 К561ИР6

**as usual the datasheets contain typos - so it's hard to guess if there's any bugs left
russian v. http://vicgain.sdot.ru/spmikro/smikr15.htm

some basic test (P/S , A→B , B→A) ::

acync. transfer from A to B (with switching A to high impedance state) ::

v.B is by** Ti datasheet , v.no-ext is by** National'-s ds. v.py is by К561ИР6 spec.-s  ► src.2016-06-17

clearifying the function of C_M,C_S AND C_М,C_П (TOP RIGHT) ::

[Eop]

1.2V Logic revised

I re-tuned most of all of my 1.2V DTL logic designs to function at least in 0.9 to 1.7 V range (using the verification on the first figure of linked post) and run them under the same oscillator setup, updated the past stats. :

 the yellows are the old v.-s of some of the inverters before revision

here're the most time efficient and energy efficient ones :

[Eop]

CD4003 (К176ТМ1)

e.g. what to do with old stuff ...

Simplified CMOS setup - to gain reasonable simulation speeds ...

one half of the chip (the 4011 and -69 have the same I/O/supply scheme) :

extendable counter setup :

[Eop]