the previous attempt to make it work (just by principal schematic) failed ... from d/s the magical hFE seems to be 11 . . . ??? (as it's the same timer as 54x00 74x00 series -- the gained information may be practical in getting these models to work with the d/s specified resistances . . .)
my input sensitivity is a bit poorer than the К554СА2 documentation specifies , but basically it will do
note :: even if it takes dual supply and more power than new comparators - then it usually is up to 10 times cheaper for experimental circuits - and someone still may have a storefull of them . . .
the hFE is not matching the 74x00 series
the pages 7,8 have a scope diagram for comparator compared to TTL inverter ::
https://www.analog.com/media/en/technical-documentation/data-sheets/lt1016.pdf
Reproduced experiment ??? ::
[Eop]
my input sensitivity is a bit poorer than the К554СА2 documentation specifies , but basically it will do
note :: even if it takes dual supply and more power than new comparators - then it usually is up to 10 times cheaper for experimental circuits - and someone still may have a storefull of them . . .
the hFE is not matching the 74x00 series
the pages 7,8 have a scope diagram for comparator compared to TTL inverter ::
https://www.analog.com/media/en/technical-documentation/data-sheets/lt1016.pdf
Reproduced experiment ??? ::
[Eop]
No comments:
Post a Comment